END PGM
Based on the syntax you provided, it looks like you are defining a or a parametric subroutine for a Biesse CNC (likely BiesseWorks , bSolid , or Retrofit G-code flavor).
; Move to start point G00 X[start_point.X] Y[start_point.Y] M31 (Spindle ON) biesse cix macro start_point line_ep endpath
; End of path command M30 (Endpath / Program End)
(PARAMETRIC PROGRAM) (TOOL: ROUTER / CIX) START PGM ; Macro definition for line from point to endpath ; Variable declaration SET VAR start_point = [X,Y] (e.g., X0 Y0) SET VAR line_ep = [X,Y] (e.g., X100 Y50) END PGM Based on the syntax you provided,
; Execution G70 (Inches) or G71 (Metric) G90 (Absolute)
MACRO "SIMPLE_LINE" PARAMETERS = start_point, line_ep BEGIN G00 start_point G01 line_ep F2000 M30 END ENDMACRO "Biesse CIX Macro: Define start_point , execute line_ep , then terminate with endpath ." If you clarify what you need (e.g., "Write the full CIX code for a macro that draws a line" ), I can give you the exact machine-ready block. or Retrofit G-code flavor).
; Linear interpolation to end point (endpath) G01 X[line_ep.X] Y[line_ep.Y] F100