Canon G2010 Resetter <Real>

Reset once to finish urgent prints, then plan to install an external waste ink tank or replace the pads within a month. Have you successfully reset your Canon G2010? Share your experience or ask questions in the comments below!

If you own a Canon Pixma G2010 (part of the popular MegaTank series), you’ve probably encountered the dreaded “Ink Absorber Full” or “5B00” error message. This usually appears after years of heavy use, and it stops you from printing entirely. canon g2010 resetter

The error doesn’t always mean the pad is physically full. Canon sets a conservative counter. However, if you’ve printed thousands of pages, the pad may actually be saturated. ⚠️ Warning: Resetting the counter without cleaning or replacing the physical ink absorber can lead to ink leaking inside your printer, potentially damaging it permanently. What is a Canon G2010 Resetter? A resetter is a small software tool (usually for Windows) that resets the printer’s internal waste ink counter back to zero. It does not physically clean or replace the ink pads — it only tells the printer that the counter is empty again. Reset once to finish urgent prints, then plan

| If your printer... | Action | |-------------------|--------| | Is < 2 years old, light use | Reset only – pad is likely fine. | | Is > 2 years old, heavy use | Open printer and replace/clean absorber pads (or install an external waste ink tank). | | Leaks ink after reset | Immediately stop using, clean internal pads, or take to a repair shop. | If you own a Canon Pixma G2010 (part

After resetting, your printer will work normally, but you should eventually service the absorber. This is the trickiest part. Many resetter downloads online contain malware, viruses, or are simply fake.